PROTOstic™ is a small
FPGA-based embedded computing product, designed for use as a flexible,
customizable embedded controller. Additionally, PROTOstic™
can serve as a general purpose embedded FPGA co-processing element.
PROTOstic™ is also designed to fit into two of the microcontroller
slots in the rear of a RABA Core Foundry PROTEUS™ chassis.
| • Altera Cyclone FPGA, supporting
1C4/12/20 sized devices, any speed grade |
| • Capable of running dual NIOS2
processors |
| • Over 400 DMIPs of embedded
processing power |
| • Custom peripherals and instructions |
| • uClinux supported |
| • MicroC/OS-2 RTOS supported |
| • Nucleus RTOS supported |
| |
| • 10/100 ethernet connectivity |
| |
| • SMSC LAN91C111 MAC+PHY chip (Directly
supported by NIOS2) |
| |
| • 16MB onboard FLASH |
| • AMD 29LV128 family (Directly
supported by NIOS2) |
| |
| • SD/MMC socket supports up to 1GB
memory |
| |
| • Accepts WiFi and GPS SD cards |
| |
| • Two independent PC100 compliant
SDRAM chips |
| • Board supports 8/16/32 MB
x 32 bits wide for each chip |
| • Micron MT48LC family (Directly
supported by NIOS2) |
| |
| • 54 GPIO pins connect FPGA to carrier
board via standard 64-pin CMC connector |
| • 32-bit PCI bus can be supported |
| |
| • Mini USB AB connector supports USB
2.0 and OTG LS and FS speeds |
| • Phillips ISP1362 host + peripheral
controller |
| |
| • Serial boot prom programming header |
| |
| • Real Time Clock with onboard battery |
| |
| • Two on-board oscillators |
| |
| • JTAG header |
| |
| Download
PROTOstic™ Product Brief (PDF) |
